Eaton BR/BD 200A 20-Space 40-Pole Raintight Meter Breaker Panel (MBE2040B200BTS)
The Eaton BR/BD 200A 20-Space 40-Pole Raintight Meter Breaker Panel (MBE2040B200BTS) by Eaton is a Meter Breaker Panel product. Available for delivery and in-store pickup at Family Hardware in Cape Coral and Fort Myers, FL.
Cape Coral: 0 available · Fort Myers: 0 available
Estimated subtotal
$359.87
Secure checkout
Easy returns
Shipping
Ships via FedEx Ground
When Will My Order Arrive?
Combines meter mounting and a circuit breaker distribution section in a rainproof enclosure. In addition to residential installations, the panel can also be used for rural service entrance, mobile homes, and for temporary power on construction sites. Main breaker factory installed. Single phase, 3-wire, flush or surface mount. Solid neutral bar and cover included. 120/240V, 10,000 AIC, NEMA 3R, rainproof, with RH hub provisions. Overhead or underground service. Raintight. UL listed.
Eaton catalog number MBE2040B200BTS · UPC 782114883594
This is Eaton MBE2040B200BTS, a BR series part. Electrical parts are matched by catalog number rather than by description, so the number on the old part, on the panel label or on the equipment nameplate is the surest way to get the same thing. Order by MBE2040B200BTS and it is identical.
Meter-breaker panels (meter main)
One enclosure carrying the utility meter socket and the main breaker with branch spaces behind it, so a single unit replaces a separate meter socket and load center. Used on a service upgrade or a new feed where the panel sits outside. The utility has to accept the socket, and the space count behind the main is what decides how many circuits you can land.
Also searched for as
Check before you order
- Amperage of the service (100A, 150A, 200A)
- Space and pole count behind the main
- Overhead or underground feed
- Rainproof rating for an outdoor mount
- That your utility approves the socket
Eaton breaker series: BR, CH, CL, BD and BQ
The series is what decides whether a breaker fits, and the series are not interchangeable. The label inside your panel door names the series the interior accepts; if the label is gone, the width of the existing breakers tells you, because BR is a full inch per pole and CH is three quarters. This part is BR series.
BR series — 1 in. per pole (this part)
The current residential line, and what most Eaton panels sold in the last twenty years take. Classified to fit a number of other makes as a replacement. Plug-on neutral BR panels let AFCI and GFCI breakers clip on without a neutral pigtail.
CH series — 3/4 in. per pole
The narrower premium line, and the one Cutler-Hammer panels take. A CH breaker will not seat in a BR panel and a BR breaker will not seat in a CH panel — the widths differ, which is the fastest way to tell them apart. CH is quiet-close and carries a longer warranty.
CL series — 1 in. per pole
The universal replacement line, built to drop into a list of other manufacturers’ panels as well as Eaton BR. Check the classification list on the breaker against the label inside your panel door before ordering.
BD series — 1 in., two circuits per pole
Duplex breakers for BR panels: two independent single-pole breakers in the space of one double-pole position, used to add circuits to a full panel. The panel label states how many duplex positions it allows and where.
BQ series — 2 in., four poles per pole
Quadplex breakers: four poles in two spaces, normally an inner two-pole pair with an outer pair either side. Independent-trip versions let one pair trip without the other. Again, the panel label governs where they may go.
Where Cutler-Hammer fits in
Cutler-Hammer is the name this line was sold under before Eaton acquired it, and panels in the field are still labelled that way. A Cutler-Hammer panel takes CH series breakers, and current Eaton CH breakers are the direct replacement for the Cutler-Hammer ones: same series, same fit, newer part number. If the label on your panel reads Cutler-Hammer, look for CH and not BR.
We stock Eaton, including Cutler-Hammer replacements
Family Hardware is an independent hardware store carrying Eaton BR and CH breakers, load centers, meter sockets, meter-breaker panels, disconnects and the small parts that go with them, from hubs and ground bars to filler plates, for contractors and homeowners alike. If you are replacing a part and are not certain of the series, the catalog number on the old one or the label inside the panel door is enough to match it.
Browse the full range on our Eaton brand page — or search the catalog number (MBE2040B200BTS) to come straight back here.