Authorized dealer
Connector
Cabineo
Lamello · art. 186305
Cabineo 8 & 12 Cabinet Connectors
The one-piece CNC cabinet connector — no edge drilling, 15 seconds per joint
Cabineo sits in a pocket milled from the panel face and screws into a 5 mm hole in the mating panel: no dowels, no edge boring, high clamping force, white or black, cover-cap ready. Starter set, or boxes of 500 and 2,000.
$100
art. no. 186305 · 1.6 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Choose item
Cabineo starter set — 40 × Cabineo 8, 40 × Cabineo 12, tool, cover caps · 186305 · $100
Quantity
Need more than 10? Request a shop quote.
Cabineo 8 / 12 — Cabineo starter set — 40 × Cabineo 8, 40 × Cabineo 12, tool, cover caps × 1
$100
Shipping (contiguous U.S.)
Free
Total before tax
$100
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Cabineo 8 / 12
Cabineo is Lamello's cabinet connector for CNC and nested-based production: a one-piece fitting that drops into a pocket milled in the panel surface and is screwed into a single 5 mm hole in the edge of the mating panel with the included ball-tip driver. Because the pocket is machined from the face there is no edge drilling and no second setup — every part comes off the CNC flat, and the connector is installed in about 15 seconds, giving cabinet boxes that assemble fast, square and with high clamping force.
Cabineo 8 is for center panels (shelves and dividers meeting a panel face); Cabineo 12 is the longer version for corner connections (top/bottom to sides). Both come in white or black and are covered with Cabineo cover caps in 12 colours. Every box includes the ball-tip driver. The starter set has 40 of each plus tool and caps to try the system on a real box.
Highlights
One-piece connector, no edge drilling
Machined from the panel face on any CNC
~15 seconds per connector, high clamping force
Cabineo 8: center panels · Cabineo 12: corners
White or black; 12 cover-cap colours
Ball-tip driver in every box
Specifications
| Article no. | 9 items — see the list above |
|---|---|
| GTIN / EAN | 7640149937534 |
| Shipping weight | 1.6 lb |
| Cabineo 8 | For center panels |
| Cabineo 12 | For corner connections |
| Screw hole | 5 mm |
| Colours | White, black |
| Packs | Starter set (40 + 40), boxes of 500 and 2,000 |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Documents
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Cabineo 8 / 12
Cabineo 8 / 12 questions
Frequently Asked Questions
Is the Lamello Cabineo 8 / 12 in stock?
Yes — the Cabineo 8 / 12 ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Cabineo 8 / 12 cost?
Cabineo starter set — 40 × Cabineo 8, 40 × Cabineo 12, tool, cover caps (186305) is $100; Cabineo 8 white — 500 (186310) is $270; Cabineo 8 white — 2,000 (186311) is $960; Cabineo 8 black — 500 (186340) is $270; Cabineo 8 black — 2,000 (186341) is $960; Cabineo 12 white — 500 (186320) is $270; Cabineo 12 white — 2,000 (186321) is $960; Cabineo 12 black — 500 (186330) is $270; Cabineo 12 black — 2,000 (186331) is $960. These are Lamello USA minimum advertised prices effective September 2026; request a quote for shop or volume pricing.
What do I need to install Cabineo 8 / 12?
A Lamello Zeta P2 or Zeta P2 Cordless set to P-System depth undefined, or a CNC with the P-System cutter, in material from undefined. The connector pushes into the groove by hand — no glue or screws to anchor it. Lock the cam with a 4 mm hex key through the 6 mm access hole; the Clamex P flexible fitting tool reaches inside carcasses.