Countersink screw, Torx® 20/59° M5x11.5-12.9,D=6.9
Order for pickup at Cape Coral · Order for pickup at Fort Myers
Order in the next: 20h 38m to pickup next Thursday
Estimated subtotal
$5.05
Secure checkout
Easy returns
Shipping
Ships via FedEx
Orders before 12:30 ET Ship Same Day. Otherwise next Business Day.
Description
Diamaster WhisperCut bevelling cutterhead, swivelling Countersink screw, Torx® 20/59° M5x11.5-12.9,D=6.9 Application: For jointing and bevelling with adjustable bevel angle. Machine: Stationary routers with/without CNC control, machining centres. Workpiece material: Hardwood, chip and fibre board (chipboard, MDF, HDF etc.), plastic coated, veneered etc., laminated veneer lumber (plywood, multiplex plywood etc.), solid surface material (Corian, Varicor etc.), fibre reinforced plastics (GRP, CFRP). Knife holder swivelling adjustable from 0 - 65°. Quick and easy angle adjustment of common angles (15°, 30°, 45°, 60°) by additional locking positions in 15° steps. Workpiece edges tear-free on both sides due to alternatinv shear angle. Economical due to partial change of diamond cutting edges. Noice reduced design with optimized gullet design for improved chip removal.
Genuine Leitz Tooling from Family Hardware
4,600+ Leitz precision tools available — expert help on bore, speed rating, and cutting materials. In-store pickup in SW Florida or shipped nationwide.
Leitz Router & CNC Bits: Buying Guide
Solid tungsten-carbide and DIAMASTER PCD diamond router tooling for profiling, trimming, nesting, and boring on hand routers and CNC machining centres. Diamond tooling delivers up to 100× the edge life of carbide on coated board and composites.
How to Choose
- Confirm the shank diameter (6, 8, 10, 12 mm or 1/2") matches your collet.
- Match cutting diameter and cutting length to the profile and material thickness.
- Pick the spiral direction — up-cut clears chips, down-cut leaves a clean top edge, compression gives clean faces on both sides of coated panels.
- Choose HW for solid wood and short runs; DP (diamond) for MDF, laminate, and high-volume nesting.
Specs to Check
Best for CNC routers, machining centres, point-to-point, and hand-held routing.
Machines & Applications
Leitz tooling is machine-brand agnostic — fit comes down to the mounting, speed rating, and rotation, not the badge on your machine. Here is where this tooling typically runs and what professional shops use it for.
Runs On These Machines
- CNC nesting routers (Homag, Biesse, SCM, Anderson, Thermwood, C.R. Onsrud)
- Point-to-point machining centres
- Hand-held & table-mounted routers
What Pros Use It For
- Nested-based cutting of melamine, MDF & plywood cabinet parts
- Profiling MDF doors, drawer fronts & signage
- Compression-spiral trimming of coated panels — clean top and bottom faces
- Solid-surface, HPL & composite panel machining