Mounting device d8/10/D20/L43.2/SW17
The Mounting device d8/10/D20/L43.2/SW17 by Leitz is a Saw Blade Adaptor & Flange product. Available for delivery and in-store pickup at Family Hardware in Cape Coral and Fort Myers, FL.
Estimated subtotal
$22.65
Secure checkout
Easy returns
Shipping
Ships via FedEx
Orders before 12:30 ET Ship Same Day. Otherwise next Business Day.
Drill adaptor, quick clamping design Mounting device d8/10/D20/L43.2/SW17 Application: Quick clamping chuck for drills with 10 mm shank and driving flat for drilling spindles with threaded adaptor. The drill is held in the chuck by the length adjusting screw (ID 009157). Ideal if the hole diameter must be changed quickly. Quick clamping chucks not in use should be covered using the optional dust cover.Note: The drill shanks require an appropriate shank and driving flat dimensional tolerance to ensure trouble free operation. Drills from the Leitz range guarantees functional reliability. Speed up to 12000 min-1 (quick change drill adaptor without drill must be covered with the dust cover ID 115521 for speeds exceeding 9000 min-1 to prevent unbalance).
Genuine Leitz Tooling from Family Hardware
4,600+ Leitz precision tools available — expert help on bore, speed rating, and cutting materials. In-store pickup in SW Florida or shipped nationwide.
Leitz Circular Saw Blades: Buying Guide
Industrial saw blades engineered for clean, chip-free cuts on panel saws, sliding-table saws, and beam saws. Precision plates and tooth geometries reduce vibration and deliver a finished edge on coated and solid material.
How to Choose
- Match the blade diameter and bore to your machine, plus any pin/drive holes.
- Pick the tooth count (Z) and geometry (ATB, TCG, or flat) for your material and finish.
- Consider a matched scoring blade for chip-free undersides on double-sided laminate.
- Confirm kerf and plate thickness for your saw and required cut quality.
Specs to Check
Best for sliding-table saws, panel saws, beam saws, and scoring units.
Machines & Applications
Leitz tooling is machine-brand agnostic — fit comes down to the mounting, speed rating, and rotation, not the badge on your machine. Here is where this tooling typically runs and what professional shops use it for.
Runs On These Machines
- Sliding table saws (Altendorf, SCM, Felder, Martin)
- Horizontal beam saws (Holzma, Schelling, Selco)
- Vertical panel saws
- Table & rip saws, scoring units
What Pros Use It For
- Chip-free sizing of melamine & laminated board
- Ripping and crosscutting hardwood & softwood
- Cutting veneered plywood with a matched scoring blade
- Batch panel sizing on beam saws in cabinet production