Authorized dealer
Accessory
P-System
Lamello · art. 132141
P-System Carbide-Tipped Groove Cutter
Replacement carbide cutter for the Zeta P2 — re-sharpenable
Ø 100.9 × 7 × 22 mm, 3 teeth. Recommended for denser hardwoods; can be re-sharpened.
$170
art. no. 132141 · 0.46 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Quantity
Need more than 10? Request a shop quote.
Carbide P-System cutter × 1
$170
Shipping (contiguous U.S.)
Free
Total before tax
$170
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Carbide P-System cutter
Carbide-tipped P-System profile groove cutter for the Lamello Zeta P2 and Zeta P2 Cordless, Ø 100.9 × 7 × 22 mm, Z3, for Clamex P and every P-System connector. Recommended for use with denser hardwoods. Unlike the diamond cutter it can be re-sharpened — and Family Hardware sharpens carbide-tipped cutters in our own sharpening shop.
Highlights
P-System profile groove cutter, 3 teeth
Recommended for dense hardwoods
Can be sharpened
Fits Zeta P2 and Zeta P2 Cordless
Specifications
| Article no. | 132141 — Carbide-tipped cutter |
|---|---|
| GTIN / EAN | 7640129663910 |
| Shipping weight | 0.46 lb |
| Dimensions | Ø 100.9 × 7 × 22 mm bore |
| Teeth | Z3 |
| Type | Carbide tipped |
| Fits | Zeta P2 / Zeta P2 Cordless |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Carbide P-System cutter
Carbide P-System cutter questions
Frequently Asked Questions
Is the Lamello Carbide P-System cutter in stock?
Yes — the Carbide P-System cutter ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Carbide P-System cutter cost?
The Carbide P-System cutter (art. 132141) is $170, Lamello USA minimum advertised pricing effective September 2026. Request a quote for shop or volume pricing.