Skip to main content

Shepherd Hardware 9450 Threaded Stem Furniture Glide with Rubber Cushion, Metal/Rubber, Silver, 1-1/16 in Dia Dimensions

Product information
30-day returns
SKU: ORG-6036867
UPC: 039003094501
MPN: 9450
Brand: Shepherd Hardware

Product information only

This item is not available for online purchase, ship to home, or ship to store checkout.

Description

The Shepherd Hardware 1-1/16 in threaded stem glides are adjustable metal base leveling glides with rubber cushions designed to help level tables and appliances. Includes four glides with a 1/4-20 Thread 1/2 in L. Not recommended for use on vinyl cushion floors.

  • Helps level office and household furniture with threaded sockets

Felt pads, glides and floor protectors: matching the pad to the leg and the floor

These all do one job — keep a leg from marking a floor — and they differ in how they attach and how much weight they take. Self-adhesive felt pads stick to a flat leg bottom and are the standard answer for chairs on hardwood and laminate; commercial-grade felt is thicker and denser than the thin household sort, which is why it stays on longer under a chair that gets dragged. Nail-on glides go into a wooden leg and will not peel off. Anti-skid pads do the opposite job: they stop a piece sliding rather than helping it slide. Self-adhesive rubber sheet is what you cut to shape when nothing off the shelf fits. Size the pad to the leg, not to the room: a pad narrower than the leg concentrates the load and digs in.

Also searched for as
felt pads for furniture
chair leg floor protectors
furniture pads for hardwood floors
floor protectors for heavy furniture
felt pads for chair legs
furniture felt pads
chair felt pads
furniture glides
chair glides
furniture sliders
nail on felt pads for chair legs
heavy duty felt pads for furniture
adhesive felt pads for furniture
anti skid furniture pads
Choosing the right one
  • Measure the leg bottom and buy a pad at least that wide — an undersized pad marks the floor faster than no pad.
  • Commercial grade is the thicker, denser felt; it is what to use under a chair that gets pushed in and out daily.
  • Clean and dry the leg before a self-adhesive pad goes on. Most pads that fall off were stuck to dust.
  • Nail-on glides for wooden legs that see hard use; self-adhesive for metal, plastic and anything you cannot nail.
  • Anti-skid pads are the opposite product — those stop furniture moving, not help it slide.
  • Replace felt when the pile is worn flat. Grit embedded in a flattened pad is what actually scratches a floor.

Ordering more than one

Count the legs, not the pieces of furniture — a dining set of six chairs and a table is 28 pads. The larger counts below cost less per pad than the small packs, and the pack options in the buy box above go further again.


Felt pads and strip, by size and count
  • 3/4 In., 20-count — Shepherd Hardware 3/4 In. Beige Self-Adhesive Commercial Grade Felt Pads (20-Count) (6705)
  • 1 In., 16-count — Shepherd Hardware 1 In. Beige Self-Adhesive Commercial Grade Felt Pads (16-Count) (6706)
  • 1 In., 48-count — Shepherd Hardware 1 In. Beige Self-Adhesive Commercial Grade Felt Pads (48-Count) (6708)
  • 1 In., 96-count — Shepherd Hardware 1 In. Beige Self-Adhesive Commercial Grade Felt Pads (96-Count) (6709)
  • 1-1/2 In., 8-count — Shepherd Hardware 1-1/2 In. Beige Self-Adhesive Commercial Grade Felt Pads (8-Count) (6707)
  • 1/2 In. x 58 In. strip — Shepherd Hardware 1/2 In. x 58 In. Beige Self-Adhesive Commercial Grade Felt Strip (6710)

Browse the full range on our Shepherd Hardware brand page.