Authorized dealer
Connector
P-System
Zeta depth 10
Lamello · art. 145304
Bisco P-10 Aligning Element
The alignment biscuit for the 10 mm P-System groove — pairs with Clamex P-10 and Tenso P-10
Same job as Bisco P-14, in the shallower 10 mm groove for 1/2" material.
$50
art. no. 145304 · 1.1 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Pack size
Quantity
Need more than 10? Request a shop quote.
Bisco P-10 — 80 pieces × 1
$50
Shipping (contiguous U.S.)
$9.95
Total before tax
$59.95
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Bisco P-10
Bisco P-10 is the alignment element for the 10 mm P-System groove used by Clamex P-10 and Tenso P-10. Like Bisco P-14 it installs without a cutter change — just set the Zeta P2 to depth 10 — and is used for flush alignment of panels, dry-fitting before final assembly, gluing, stiffening and increasing shear strength in thin material.
Highlights
7 mm plastic element for the 10 mm P-System groove
Flush alignment and dry-fitting in 1/2" material
Self-clamping in the groove
Fixed connections possible with PVA glue
Specifications
| Article no. | 145304 — 80 pieces · 145305 — 300 pieces |
|---|---|
| GTIN / EAN | 7640129666768 |
| Shipping weight | 1.1 lb |
| Size | 52 × 19 × 7 mm |
| Material | Plastic |
| Installation depth | 10 mm (Zeta P2 setting 10) |
| Installation tolerance | Longitudinal ± 2 mm |
| Cutter | Ø 100.4 × 7 × 22 mm P-System |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Documents
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Bisco P-10
Bisco P-10 questions
Frequently Asked Questions
Is the Lamello Bisco P-10 in stock?
Yes — the Bisco P-10 ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Bisco P-10 cost?
80 pieces (145304) is $50; 300 pieces (145305) is $135. These are Lamello USA minimum advertised prices effective September 2026; request a quote for shop or volume pricing.
What do I need to install Bisco P-10?
A Lamello Zeta P2 or Zeta P2 Cordless set to P-System depth 10, or a CNC with the P-System cutter, in material from 12 mm (1/2"). The connector pushes into the groove by hand — no glue or screws to anchor it.