Authorized dealer
Connector
P-System
Zeta depth 14
Lamello · art. 145301
Bisco P-14 Aligning Element
The plastic P-System biscuit — flush alignment, dry-fitting, gluing and shear strength
Fits the same 14 mm P-System groove as Clamex P-14 and Tenso P-14 with no cutter change. Dry-fit face frames and scribes before committing to Tenso.
$50
art. no. 145301 · 1.4 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Pack size
Quantity
Need more than 10? Request a shop quote.
Bisco P-14 — 80 pieces × 1
$50
Shipping (contiguous U.S.)
$9.95
Total before tax
$59.95
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Bisco P-14
Lamello's Bisco P is an alignment element that is part of the Clamex P system. It installs with the Zeta P2, Zeta P2 Cordless or CNC and fits straight into the P-System groove without changing the cutter. Bisco P-14 is a 7 mm thick plastic element used in combination with Clamex P-14 and Tenso P-14.
Use it for the flush alignment of panels, for gluing, stiffening and increasing shear strength — and for dry-fitting connections before final assembly with Clamex or Tenso. It is self-clamping in the groove thanks to its surface structure, and fixed connections are possible with PVA glue.
Highlights
7 mm plastic element for the P-System groove
Flush alignment of panels, stiffening and increased shear strength
Dry-fit connections before final assembly with Clamex or Tenso
Fits the P-System groove without changing the cutter
Self-clamping in the groove via surface structure
Fixed connections possible with PVA glue
Watch
Specifications
| Article no. | 145301 — 80 pieces · 145302 — 300 pieces · 145303 — 1000 pieces |
|---|---|
| GTIN / EAN | 7640129660865 |
| Shipping weight | 1.4 lb |
| Size | 65 × 27 × 7 mm |
| Material | Plastic |
| Installation depth | 14 mm (Zeta P2 setting 14) |
| Min. material thickness | 16 mm |
| Installation tolerance | Longitudinal ± 2 mm |
| Cutter | Ø 100.4 × 7 × 22 mm P-System |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Documents
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Bisco P-14
Bisco P-14 questions
Frequently Asked Questions
Is the Lamello Bisco P-14 in stock?
Yes — the Bisco P-14 ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Bisco P-14 cost?
80 pieces (145301) is $50; 300 pieces (145302) is $145; 1000 pieces (145303) is $395. These are Lamello USA minimum advertised prices effective September 2026; request a quote for shop or volume pricing.
What do I need to install Bisco P-14?
A Lamello Zeta P2 or Zeta P2 Cordless set to P-System depth 14, or a CNC with the P-System cutter, in material from 16 mm (5/8"). The connector pushes into the groove by hand — no glue or screws to anchor it.