Authorized dealer
Connector
P-System
Zeta depth 10
Lamello · art. 145372
Clamex P-10 Detachable Connector for Thin Material
The Clamex cam lock for material from 12 mm (1/2") — miters from 15 mm
Shallow 10 mm installation depth brings the detachable Clamex joint to 1/2" panels, drawer boxes and crown-molding miters.
$175
art. no. 145372 · 1.6 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Pack size
Quantity
Need more than 10? Request a shop quote.
Clamex P-10 — 80 pairs × 1
$175
Shipping (contiguous U.S.)
Free
Total before tax
$175
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Clamex P-10
Clamex P-10 is a detachable, two-part connector with an internal cam lock engaged with a lever. Compared with Clamex P-14 it has a shallower installation depth of just 10 mm, so it can be used in thinner material: butt and surface joints from 12–13 mm (1/2") and miters from 15 mm (9/16"). Two torsion tabs give the connector strong dimensional stability.
Lamello's form-locking P-System anchors the connector in the work piece in seconds without tools, glue or screws, and the joint stays nearly invisible behind its 6 mm access hole. Clamex P-10 is also a favorite for clamping outside crown-molding miters from 15 mm thick.
Cut the groove with the Zeta P2 at depth setting 10, with the Zeta P2 Cordless, or on a CNC.
Highlights
Minimal installation depth for material as thin as 13 mm (1/2") on surface or corner joints
Detachable miter connector for 30–180° angles in material from 15 mm (9/16")
Nearly invisible 6 mm tool opening
Fast, tool-free installation of connectors
Stackable for transport with connectors pre-installed
High clamping force for gluing components at all angles
Specifications
| Article no. | 145372 — 80 pairs · 145373 — 300 pairs · 145374 — 1000 pairs |
|---|---|
| GTIN / EAN | 7640149930290 |
| Shipping weight | 1.6 lb |
| Size | 52 × 19 × 9.7 mm |
| Shell / lever | Fiberglass-reinforced plastic / zinc die-cast |
| Installation depth | 10 mm (Zeta P2 setting 10) |
| Min. material thickness | 12–13 mm (1/2") butt/surface · 15 mm (9/16") miters |
| Installation tolerance | Longitudinal ± 0.5 mm |
| Tensile strength | Particle board ~118 lb · MDF ~154 lb · beech ~198 lb |
| Shear strength | Particle board ~92 lb · MDF ~116 lb · beech ~350 lb |
| Cutter | Ø 100.4 × 7 × 22 mm P-System |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Documents
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Clamex P-10
Clamex P-10 questions
Frequently Asked Questions
Is the Lamello Clamex P-10 in stock?
Yes — the Clamex P-10 ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Clamex P-10 cost?
80 pairs (145372) is $175; 300 pairs (145373) is $610; 1000 pairs (145374) is $1,825. These are Lamello USA minimum advertised prices effective September 2026; request a quote for shop or volume pricing.
What do I need to install Clamex P-10?
A Lamello Zeta P2 or Zeta P2 Cordless set to P-System depth 10, or a CNC with the P-System cutter, in material from 12 mm (1/2"). The connector pushes into the groove by hand — no glue or screws to anchor it. Lock the cam with a 4 mm hex key through the 6 mm access hole; the Clamex P flexible fitting tool reaches inside carcasses.