Authorized dealer
Connector
Biscuit joiners & original biscuits
Lamello · art. 145231
Clamex S-18 Detachable Connector
The detachable Clamex connector for standard biscuit joiners — no Zeta required
Interlocking connector with a metal lever that installs in an 8 mm slot cut by any Lamello biscuit joiner with the 132108 reversible cutter. 18, 80 or 300 pairs.
$85
art. no. 145231 · 0.83 lb
Authorized dealer · ships from Lamello USA stock — typically within a few business days
Pack size
Quantity
Need more than 10? Request a shop quote.
Clamex S-18 — 18 pairs × 1
$85
Shipping (contiguous U.S.)
$9.95
Total before tax
$94.95
Free parcel shipping on orders of $99 or more; $9.95 below that. Sales tax calculated at checkout.
Prices are Lamello USA minimum advertised pricing effective September 2026. Cabinet shops, installers and commercial accounts: request a quote for volume pricing, CNC tooling and anything in the Lamello catalog not shown here.
About this product
Clamex S-18
Clamex S-18 brings the detachable cam-lock joint to shops without a Zeta P2: it installs in an 8 mm groove cut by a Classic X, Top 21 or Zeta with the Clamex S carbide reversible cutter (132108) and is fixed in the work piece with two screws through the Clamex S drill jig (125240). Lock and unlock with a 4 mm hex key through a 6 mm hole, exactly like Clamex P.
Use only with cutter 132108 (or 132118). For the tool-free, form-locking version use Clamex P-14 with the Zeta P2.
Highlights
Detachable metal-lever connector
Fits any Lamello biscuit joiner with cutter 132108
Screw-fixed via Clamex S drill jig 125240
6 mm access hole, 4 mm hex key
18, 80 or 300 pairs
Specifications
| Article no. | 145231 — 18 pairs · 145236 — 80 pairs · 145241 — 300 pairs |
|---|---|
| GTIN / EAN | 7640129663606 |
| Shipping weight | 0.83 lb |
| Size | 66 × 29 × 8 mm |
| Material | Fiberglass-reinforced plastic, metal lever |
| Slot | 8 mm — cutter 132108 / 132118 only |
| Installation tolerance | ± 2 mm |
| Jig | Clamex S drill jig 125240 |
| Brand | Lamello AG, Bubendorf, Switzerland · distributed by Lamello USA (Colonial Saw) |
Documents
Prices are Lamello USA minimum advertised pricing effective September 2026. Specifications from Lamello; strength values are Lamello test figures and vary with material.
Goes with it
Pair with the Clamex S-18
Clamex S-18 questions
Frequently Asked Questions
Is the Lamello Clamex S-18 in stock?
Yes — the Clamex S-18 ships from Lamello USA / Family Hardware stock, typically within a few business days, by parcel anywhere in the contiguous U.S. (free on orders of $99 or more) or for pickup in Cape Coral or Fort Myers. Larger quantities for production shops are quoted with a confirmed lead time.
How much does the Clamex S-18 cost?
18 pairs (145231) is $85; 80 pairs (145236) is $300; 300 pairs (145241) is $980. These are Lamello USA minimum advertised prices effective September 2026; request a quote for shop or volume pricing.
What do I need to install Clamex S-18?
A Lamello Zeta P2 or Zeta P2 Cordless set to P-System depth undefined, or a CNC with the P-System cutter, in material from undefined. The connector pushes into the groove by hand — no glue or screws to anchor it. Lock the cam with a 4 mm hex key through the 6 mm access hole; the Clamex P flexible fitting tool reaches inside carcasses.