Skip to main content
877-755-2005
Locations
Contact Us
877-755-2005
Locations
Contact Us
logo

Grills

THE SAW BLADE SHOP

16" Saw Blades

Large beam saws and industrial rip and crosscut saws. Filter by what you are cutting, tooth count and arbor to narrow the 16" blades to the right one.

Shop 16" blades Shop by saw or cut
1,848Blades
4Brands
Since 1976Family owned
CNCSharpening in house
THE SAW BLADE SHOP AT FAMILY HARDWARECAPE CORAL, FLORIDA · SHIPS NATIONWIDE
01 Freud, Diablo & Tenryu ship from our catalog02 Popular Tools ships direct, 2% below list03 Mail-in sharpening, free shipping on 10+ blades04 Real saw people: 239-574-2540

YOUR NEXT CUT STARTS HERE

What are you running? What are you cutting?

Browse the full catalog ↗

Shop by saw

Table saw blades 540 bladesMiter saw blades 465 bladesCircular saw blades 100 bladesTrack saw blades 12 bladesPanel saw blades 171 blades

Shop by cut

Rip blades 220 bladesCrosscut & fine finish 167 bladesCombination blades 68 bladesGeneral purpose 297 bladesDado sets 50 bladesThin kerf 334 blades

Shop by material

Laminate & melamine 203 bladesAluminum & non-ferrous 300 bladesSteel & metal cutting 72 bladesPlastics & solid surface 58 bladesFiber cement 33 blades

Shop by diameter

7-1/4" blades 49 blades8-1/4" blades 13 blades10" blades 234 blades12" blades 215 blades14" blades 124 blades16" blades 70 blades

Shop by arbor

5/8" arbor 418 blades1" arbor 472 blades30mm arbor 342 blades

16" BLADES ACROSS ALL FOUR BRANDS

Shop 16" blades.

Four brands. One set of specs. Filter by what you cut, what you run and what fits.

Large beam saws and industrial rip and crosscut saws. Filter by what you are cutting, tooth count and arbor to narrow the 16" blades to the right one.

70 blades
Refine your selection
Brand
Diameter

Match your saw. Most table and miter saws take 10" or 12"; circular saws 7-1/4".

What are you cutting?
Blade type
Saw
Tooth count

Fewer teeth cut faster; more teeth leave a finer edge.

Arbor / bore
Tooth grind
Kerf
Price
FreudHeavy-Duty Ripping

16" Heavy-Duty Rip Blade

#LM72R016
16"Dia.
36Teeth
1"Arbor
FTGGrind
RippingWood.177" kerf20° hook
$161.97
In our catalog, ships from Family Hardware
FreudHeavy-Duty Ripping

16" Heavy-Duty Rip Blade

#LM72M016
16"Dia.
36Teeth
1"Arbor
FTGGrind
RippingWood.177" kerf20° hook
$139.47
In our catalog, ships from Family Hardware
FreudThick Stock Ripping

16" Thick Stock Rip Blade

#LM71M016
16"Dia.
28Teeth
1"Arbor
FTGGrind
RippingWood.177" kerf20° hook
$130.47
In our catalog, ships from Family Hardware
FreudCabinetmaker’s Crosscutting

16" Cabinetmaker’s Crosscut Blade

#LU73M016
16"Dia.
96Teeth
1"Arbor
ATBGrind
Crosscut & Fine FinishWood.150" kerf10° hook
$185.97
In our catalog, ships from Family Hardware
FreudCombination

16" Combination Blade

#LU84R016
16"Dia.
80Teeth
1"Arbor
ATB+RGrind
CombinationWood.157" kerf10° hook
$208.47
In our catalog, ships from Family Hardware
FreudHeavy Duty Multi-Purpose

16" Heavy Duty Multi-Purpose Blade

#LU82M016
16"Dia.
96Teeth
1"Arbor
TCGGrind
CombinationWood.177" kerf10° hook
$213.97
In our catalog, ships from Family Hardware
FreudAluminum & Non-Ferrous (Thick)

16" Thick Stock Aluminum Metal Blade

#LU89M016
16"Dia.
114Teeth
1"Arbor
TCGGrind
Non-Ferrous & AluminumAluminum & Non-Ferrous.142" kerf-7° hook
$254.97
In our catalog, ships from Family Hardware
FreudSingle Sided Laminate/Melamine

16" Single Sided Laminate/Melamine Blade

#LU98R016
16"Dia.
120Teeth
1"Arbor
TCGGrind
Laminate & MelamineLaminate & Melamine.150" kerf10° hook
$266.97
In our catalog, ships from Family Hardware
FreudHigh Production General Purpose

16" High-Production General Purpose Blade

#LU71M016
16"Dia.
48Teeth
1"Arbor
ATBGrind
CombinationWood.177" kerf15° hook
$151.47
In our catalog, ships from Family Hardware
FreudHeavy Duty Stacked Chipboard

16" Heavy Duty Stacked Chipboard Blade

#LU81M016
16"Dia.
60Teeth
1"Arbor
TCGGrind
Laminate & MelaminePlywood & Sheet Goods.150" kerf13° hook
$171.47
In our catalog, ships from Family Hardware
FreudGeneral Purpose

16" General Purpose Blade

#LU72M016
16"Dia.
60Teeth
1"Arbor
ATBGrind
General PurposeWood.150" kerf13° hook
$147.97
In our catalog, ships from Family Hardware
FreudCombination

16" Combination Blade

#LU84M016
16"Dia.
80Teeth
1"Arbor
ATB+RGrind
CombinationWood.157" kerf10° hook
$171.47
In our catalog, ships from Family Hardware

A LITTLE KNOW-HOW. A BETTER CUT.

How to choose a saw blade.

Start with the saw. Then the cut. Then the material. The blade picks itself.

01 / DIAMETER & ARBOR

Match the saw first.

Read the diameter and arbor off your old blade or the saw’s plate. 7-1/4" with a 5/8" knockout is the circular saw standard; 10" or 12" with a 5/8" or 1" bore covers most table and miter saws; European sliders run 30mm.

02 / TOOTH COUNT

Fewer teeth cut faster. More teeth cut cleaner.

24T rips solid stock with the grain. 40–50T is the general purpose and combination range. 60–80T crosscuts trim and plywood. 80–120T leaves melamine, laminate and aluminum chip-free.

03 / GRIND & HOOK

The tooth shape is the job.

ATB shears wood cleanly; FTG rips; TCG survives laminate, plastics and non-ferrous metal; Hi-ATB is the chip-free finish grind. A negative hook keeps a sliding miter or radial arm saw from climbing the cut.

04 / KEEP IT SHARP

A good blade is sharpened, not replaced.

Every blade here can come back to our CNC sharpening shop in Cape Coral, in person or by mail, and be ground back to its original geometry many times over.

Carbide saw blade ready for sharpeningBUY IT HERE.
SHARPEN IT HERE.

THE OTHER HALF OF THE SHOP

Every blade on this page
comes back to our bench.

We sharpen carbide saw blades on CNC grinders in Cape Coral and take blades by mail from every state. Buy the blade here, run it hard, send it back: we grind it to the original geometry so it cuts like the day it arrived.

  • 01 Free shipping both ways on 10+ blades
  • 02 Prepaid UPS label emailed within a day
  • 03 Carbide, cermet and PCD tooth replacement
  • 04 Drop-off and pickup in Southwest Florida
Mail-in sharpening

STRAIGHT ANSWERS

Saw blade questions.

How do I know which saw blade fits my saw?

Two numbers: the blade diameter and the arbor (bore). Both are printed on your current blade and in the saw’s manual. Most table saws and 10" miter saws take a 10" blade with a 5/8" arbor; 12" miter saws take 12" × 1"; corded and cordless circular saws take 7-1/4" × 5/8" with a diamond knockout; European sliding table saws take 30mm bores with pinholes. Filter this shop by diameter and arbor and every blade shown will fit.

How many teeth should a saw blade have?

Fewer teeth cut faster and clear chips better; more teeth leave a smoother edge. Use 24 teeth for ripping solid wood, 40–50 for general purpose and combination work, 60–80 for crosscutting trim and plywood, and 80–120 for melamine, laminate, veneer and aluminum.

What is the difference between ATB, TCG, FTG and Hi-ATB grinds?

ATB (alternate top bevel) teeth shear fibres for clean crosscuts in wood. FTG (flat top grind) teeth chisel through ripping cuts. TCG (triple chip grind) alternates a chamfered tooth with a flat raker and stands up to laminate, plastics and non-ferrous metal. Hi-ATB uses a steeper bevel for chip-free cuts in melamine and veneered plywood. ATB+R combination blades mix bevel teeth with a raker so one blade rips and crosscuts.

Can I buy Freud, Diablo, Tenryu and Popular Tools blades in one order?

Freud, Diablo and Tenryu blades are stocked in our catalog and go straight into your shopping cart. Popular Tools blades ship direct from Popular’s U.S. warehouses and are ordered through their own order box on this page; they check out separately. Both orders come from the same family-owned shop in Cape Coral, Florida.

Do you sharpen these blades?

Yes. Family Hardware runs a CNC carbide saw blade sharpening service in Cape Coral with mail-in service nationwide, and free shipping both ways on 10 or more blades. Every blade in this shop can be sharpened back to its original geometry.

What does thin kerf mean and when should I choose it?

Kerf is the width of the cut. Thin kerf blades (under .100") remove less material, so they need less power: the right choice for contractor table saws, cordless circular saws and anyone trying to save stock. Full kerf blades (.100" and up) run truer on high-horsepower cabinet saws and industrial machines.

Which blade for cutting aluminum or steel?

Aluminum, brass and other non-ferrous metals want a triple chip grind with a negative hook angle, such as Tenryu Alumi-Cut, Freud non-ferrous blades or Popular Tools non-ferrous series. Steel needs a dedicated ferrous blade for a dry-cut metal saw, such as Diablo Steel Demon or Tenryu Steel-Pro. Never run a wood blade in metal.

Good blades. People who sharpen them.239-574-2540[email protected]Talk to our team →

About Family Hardware

Store Locations

About Us

Hurricane Prep Guide

Employment

Voice-to-Invoice

Customer Service

Contact Us

Returns

Shipping & Tracking

Gift Card Balance

Rewards

Promotions

Credit Application

Locations

Cape Coral

Fort Myers

All Store Locations

Grills

Grill Store — All Grills

Alfa Pizza Ovens

Big Green Egg

Napoleon

Challenger Designs

Delta Heat

Tagwood BBQ

Twin Eagles

Replacement Parts

Warranty

Services

All Services

Saw Blade Sharpening

Saw Blade Shop

Key Cutting

Screen Repair

Propane Exchange

Lamp Repair

Key Fob Batteries

Freud

Lamello P-System

Popular Tools Saw Blades

Diablo

Tenryu

© 2026 Family Hardware. Family Hardware and the Family Hardware logo are registered trademarks of Family Hardware Corporation. All rights reserved.